COATING TYPE: AQUA-SLIP WATERBORNE COPOLYMER/TERPOLYMERS
AQUA-SLIP: Waterborne dispersions, emulsions or solution coatings. For use as a quick release coating for interiors of plastic pellet hoppers, coal cars, fly ash hoppers, refuse containers and recycle trucks. Polyethylene and /or Teflon extenders are used. The emulsion versions exhibit excellent acid and alkali resistance, while the dispersions and solution have dilute acid and alkali resistance.
MIXING RATIO: N/A
POT LIFE: N/A
PUMP PRESSURE: 1500-1800 psi
TIP SIZES: 6/19;6/21’s
FILTERS: 60 MESH
MIN STEEL TEMP: 50 deg F
MIN APPLICATION TEMP: 50 deg F
MIN RELATIVE HUMIDITY: SEE *
REQUIRED WET MILS: 6-8
SPRAY TECHNIQUE: CROSSCOAT
50% OVERLAP
DRY TO TOUCH: 30-60 MIN
MIN RECOAT TIME: 30-60 MIN
EQUIPMENT REQUIREMENTS: AIR/AIRLESS
V.O.C.: 0.60-1.20 DEHYDRATED
SUBSTRATE: THERMALBOND VERSIONS: CRS,
HRS,GALV,AL
AQUA-LUST VERSIONS: CRS,HRS
D.O.T.: NON-FLAMMABLE
POT LIFE: N/A
PUMP PRESSURE: 1500-1800 psi
TIP SIZES: 6/19;6/21’s
FILTERS: 60 MESH
MIN STEEL TEMP: 50 deg F
MIN APPLICATION TEMP: 50 deg F
MIN RELATIVE HUMIDITY: SEE *
REQUIRED WET MILS: 6-8
SPRAY TECHNIQUE: CROSSCOAT
50% OVERLAP
DRY TO TOUCH: 30-60 MIN
MIN RECOAT TIME: 30-60 MIN
EQUIPMENT REQUIREMENTS: AIR/AIRLESS
V.O.C.: 0.60-1.20 DEHYDRATED
SUBSTRATE: THERMALBOND VERSIONS: CRS,
HRS,GALV,AL
AQUA-LUST VERSIONS: CRS,HRS
D.O.T.: NON-FLAMMABLE
SWEAT IN TIME: N/A
THINNING: N/A
SOLVENT TYPE: WATER
REDUCTION: NONE
VISCOSITY: 3500-5500 CPS
MAX STEEL TEMP: 85 deg F
MAX APPLICATION TEMP: 85 deg F
MAX RELATIVE HUMIDITY: SEE *
REQUIRED DRY MILS: 3.5-4.0
DRY THROUGH: 10-12 HRS
MAX RECOAT TIME: SEE **
SOLIDS BY VOLUME: 50-54%
FREEZE THAW: SEE ***
SURFACE PREP: SSPC-SP-6/REMOVE OIL & GREASE
THINNING: N/A
SOLVENT TYPE: WATER
REDUCTION: NONE
VISCOSITY: 3500-5500 CPS
MAX STEEL TEMP: 85 deg F
MAX APPLICATION TEMP: 85 deg F
MAX RELATIVE HUMIDITY: SEE *
REQUIRED DRY MILS: 3.5-4.0
DRY THROUGH: 10-12 HRS
MAX RECOAT TIME: SEE **
SOLIDS BY VOLUME: 50-54%
FREEZE THAW: SEE ***
SURFACE PREP: SSPC-SP-6/REMOVE OIL & GREASE
