18-14466-80 EXT.EPOXY (413C) GRAY

TECHNICAL DATA
60 deg Gardner Gloss 85-90
%Solids (weight): 82.216 (+/-2%)
Viscosity: MIX 3520 A2240 B2780 (+/-10%)
%Solids (volume): 79.039 (+/-2%)
pH:(+/- 0.8)
Density: 11.065 (lb/gl), 1.32 (gr/ml)
Flash Point: 45 0Deg F), 7 (deg C)
VOC(as used): 1.525 (lb/gl) 182.69 (gr/l)
DOT-HM 102 10:
Freeze Thaw Stability YES

APPLICATION DATA
Bake Temperature: 130 F PMT, 54 C PMT
Bake Time: 60 Min
Reduction: NA or 2-5%
Reducer: HEAT or R-5136
Tack Free: 4-6 HRS. (74 deg. F, 23 deg C)
Pot Life: 1HR@STP
Tip Size for PLURAL COMP. spray, use 5/17-6/17 tips @ 2500-3000 psi, 172-207 Bar
Theoretical Coverage: 1267 (sq ft/gal/1 dry mil), 31 (sq m/liter/25 microns)
Application Method: PLURAL COMP.
Substrate: COLD & HOT ROLLED STEEL
Surface Preperation: SSPC-SP-6, SA 2.0
Storage Temperature: 38-90 FF

SPECIAL INSTRUCTIONS:
MIX COMP. A WITH COMP B (1:1), UTILIZING PLURAL COMP. EQUIP. SET
HOPPER TEMPS. AND INLINE HEATERS AT 90 deg.s F. THIS WILL ALLOW
OPTIMUM IN FLOW AND LEVELING. IF YOU PREFER TO REDUCE THE MIXED
COATING USE R-5136 at 2-5% BY VOLUME. ALLOW A MIN. of 45 MIN FLASH OFF
PRIOR TO MOVING INTO OVEN.STANDARD BAKE IS 130F (PMT) FOR 60 MIN.